Installation Manual
Rear View Safety Reverse With Condence ™
16 17
TEMPERATURE SETTING
Q&A
Temperature Setting (Option)
Q: Why does the compass need to be calibrated?
A: The magnetism of a car is stronger than the magnetism of the Earth. The compass will only
function properly if it is calibrated to the magnetic conditions of Earth.
Q: Why is the compass not accurate in some areas?
A: In some areas, such as iron mines, high-intensity magnetic elds change the Earth’s
magnetism.
Q: Why are old cars more dicult to calibrate than new cars?
A: The older a car is, the more magnetized it will be. More magnetized cars are more dicult
to calibrate and may still have problems after calibration.
Press “MENU” to enter into “SETTING” menu, and press “SEL/REC” button to choose the
“TEMP UNIT”. Press UP/DOWN to switch between °F and °C 4-1.
Temperature Sensor Installation
The Distribution Of Magnetic Fluxline
Locate the temperature sensor between the front of the radiator and the front
bumper. Slide the metal clip over the edge of the sheet metal or plasic shield until it is secure.
Do not install the temperature sensor near the engine.
We do not recommend using the compass in an area with high magnetic
lines of ux. For example, in the north of Canada.
MAGNETIC FLUXLINE DISTRIBUTION