Installation Manual
Rear View Safety Reverse With Condence ™
2 3
Introduction...............................03
Safety Information..........................04-06
Before Beginning Installation . . . . . . . . . . . . . . . . . . . . . . . 07
Installation Guide.......................... 08-09
Adjustable Grid Line...........................10
Installation and Wire........................11-13
Digital Compass Calibration ......................14-15
Magnetic Fluxline Distribution. . . . . . . . . . . . . . . . . . . . . . . . 17-19
Monitor Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Camera Specication...........................21
Camera Installation ...........................22
Troubleshooting.............................23
Warranty & Disclaimer........................ 24-25
TABLE OF CONTENTS
NOTE!
Please read all of the installation instructions
carefully before installing the product. Improper
installation will void manufacturer’s warranty.
Congratulations on purchasing a Rear View Backup
Camera System!
With this manual you will be able to properly install and
operate the unit.
The Backup Camera System is intended to be installed as a
supplement aid to your standard rear view mirror that already exists
in your vehicle. The Backup Camera System should not be used as a
substitute for the standard rear view mirror or for any other mirror
that exists in your vehicle.
In some jurisdictions, it is unlawful for a person to drive a
motor vehicle equipped with a TV viewer or screen located forward of
the back of the driver’s seat or in any location that is visible, directly
or indirectly, to the driver while operating the vehicle.
INTRODUCTION