Instruction Manual

Vehicle Safety - It's All We Do.

9. WebAPP Operating Instructions

9.1 Preparation

• 360 control has internal wi, and wi antenna is connected.

• This Web UI function does not support IOS system, please use mobile phone with android system to

access.

• Access must be done using the Google browser. Because this Web UI is developed based on the

rendering engine of Google browser, some built-in phone browsers or other types of browsers may

not support the responsive function well.

9.2 Connection

Step 1: After the 360 system is powered on, turn on "WLAN "of the mobile phone, search for wi signal

“stonkamavs” and connect to it. Password is "12345678".

Step2: Open browser, enter “192.168.30.1” in the address bar and access and enter the WebAPP

operation interface. The upper half of the operation interface is a control keyboard, which is equal to

the remote control button function. The lower half area refreshes the current display screen of the 360

system in real time, which is equal to display function. In the upper right area is the tool bar, and

more settings can be adjusted here.

Note: The display screen on mobile phone has a delay for the control button response.

Please do not enter the settings quickly and repeatedly.