Instruction Manual
Vehicle Safety - It's All We Do.
TM
23
6.2.10 Radar Setup
Note:
1) UART interface will display in menu when select Radar in system setup.
2) Single-view will shift according to the priority degree of radar orientation set in System Setup if
the multi-sensor radar detects obstacles within dangerous range (0.6m).
1)
Channel and Sensors: Each channel uses 3 sensors. Red sign ickers when sensor
detects any obstacle in the range. If combine-select currently edited locations of radar sensor, their rep-
resented red blocks will icker.
2)
Select on to enable sensor to work and o to disable. Detection range is congurable
from 0.6m to 5m.
3)
Save settings of selected radar sensors.
4)
Restore to the initial default setting.
5)
Exit to get back to main menu.