Installation Manual

Rear View Safety Reverse With Condence ™
16 17
CAMERA
Camera Specications
• Do a hard reset, unplug all cables
and power cables, leave out for 1
minute and then re-connect them
• Check to ensure that the
connection to the camera is tight
• Verify camera cable is plugged into
port labeled Backup Camera
• Verify that the green positive
trigger on power harness is set to re-
verse power 12v+
• Verify camera is on correct camera
input
• Verify cable is connected to
monitor
• Connect known working camera
and cable to monitor
No Image On Screen
TROUBLESHOOTING
Sensor PC1089
Lens F=2.8
Resolution 480 TV Lines
Eective Pixels N: 728(H) x 488(V) | P: 762(H) x
504(V)
TV System NTSC/PAL
Minimum Illumination 0.5 Lux
Waterproof Rating IP68
Viewing Angle 120°
Infra-red Lights 8
AGC Auto
BLC Auto
S/N Ratio More than 48dB
Video Output CVBS
Signal 1.0vp-p
Impedance 75
Power Supply DC 9V-32V
Operating Temperature -40 ~ +75 °C