Installation Manual
Reverse With Condence ™
21
• REC-V OUT: Toggle which camera view will record when a DVR is attached
(LEFT/RIGHT/FRONT/QUAD).
• AUTOSCAN: When setting is ON, the monitor automatically switches be-
tween connected camera inputs and quad view.
• SCAN DELAY: Toggle AUTOSCAN delay (0-60 seconds).
• JUMP KEY: Toggle jump key destination. Select from 13 display modes as
shown on the left.
• POWER ON: Toggle default display mode. Select from 13 display modes as
shown on the left.
• BEEP: Control audible alert (beep) when buttons are pressed. Turn ON/OFF.
• SYSTEM: Toggle PAL / NTSC.
• DIMMER: Toggle screen backlighting brightness. Choose from 5 levels and
AUTO. When AUTO is selected, backlighting automatically adjusts in accor-
dance with brightness conditions.
SYSTEM SETUP