Instruction Manual

15
Reverse With Confidence
™
Troubleshooting
No Image On Screen
• Do a hard reset, unplug all
cables and power cables, leave
out for 1 minute and then
re-connect them.
• Check to ensure that the con-
nection to the camera is tight.
• Verify camera cable is plugged
into port labeled Backup Camera
• Verify that the green positive
trigger on power harness is
put to power 12v+.
• Verify camera is on correct
camera input
• Verify cable is connected to
monitor
• Verify camera is connected to
cable
• Connect known working
camera and cable to monitor.
• Verify Green trigger is receiv-
ing power