Instruction Manual
Rear View Safety Reverse With Condence ™
8 9
INSTALLATION GUIDE
VIEWING OPTIONS
Viewing Options
4 5
HOW TO INSTALL MIRROR MONITOR
Remove the original mirror
Car factory original mirror The plate on the windshield
CAUTION!
NOTE: Always use caution, DO NOT force the mount. We will not be responsible for broken windshields. If you
are not sure how to remove or re-install the mirror seek trained, qualied help.
Dangerous
Ok
Windshield
Windshield
Dangerous
Ok
1. 2.
Different cars have different brackets. It depends
on your vehicle maker and manufacturer.There are
many methods to remove the original rear view
mirror, however, please don’t force the mirror off
the bracket.
The manufacturer will not be responsible for
damage caused to your car by wrong installation of
the mirror.
Install mirror monitor on the plate
Install rear view mirror along this directionTake down your original mirror, and make
the mirror monitor ready
windshield
Please make sure to install the mirror to
the end of the bottom without any loose
Contrarotate the xed rear view mirror
Torque is about 0.8-1.3 N.m
windshield
windshield
Original Mirror Installation
4 5
HOW TO INSTALL MIRROR MONITOR
Remove the original mirror
Car factory original mirror The plate on the windshield
CAUTION!
NOTE: Always use caution, DO NOT force the mount. We will not be responsible for broken windshields. If you
are not sure how to remove or re-install the mirror seek trained, qualied help.
Dangerous
Ok
Windshield
Windshield
Dangerous
Ok
1. 2.
Different cars have different brackets. It depends
on your vehicle maker and manufacturer.There are
many methods to remove the original rear view
mirror, however, please don’t force the mirror off
the bracket.
The manufacturer will not be responsible for
damage caused to your car by wrong installation of
the mirror.
Install mirror monitor on the plate
Install rear view mirror along this directionTake down your original mirror, and make
the mirror monitor ready
windshield
Please make sure to install the mirror to
the end of the bottom without any loose
Contrarotate the xed rear view mirror
Torque is about 0.8-1.3 N.m
windshield
windshield
4 5
HOW TO INSTALL MIRROR MONITOR
Remove the original mirror
Car factory original mirror The plate on the windshield
CAUTION!
NOTE: Always use caution, DO NOT force the mount. We will not be responsible for broken windshields. If you
are not sure how to remove or re-install the mirror seek trained, qualied help.
Dangerous
Ok
Windshield
Windshield
Dangerous
Ok
1. 2.
Different cars have different brackets. It depends
on your vehicle maker and manufacturer.There are
many methods to remove the original rear view
mirror, however, please don’t force the mirror off
the bracket.
The manufacturer will not be responsible for
damage caused to your car by wrong installation of
the mirror.
Install mirror monitor on the plate
Install rear view mirror along this directionTake down your original mirror, and make
the mirror monitor ready
windshield
Please make sure to install the mirror to
the end of the bottom without any loose
Contrarotate the xed rear view mirror
Torque is about 0.8-1.3 N.m
windshield
windshield
1 2
3
Original mirror
Windshield plate
1) Take down original mirror
2) Install rear view mirror
3) Tighten rear view mirror
4 5
HOW TO INSTALL MIRROR MONITOR
Remove the original mirror
Car factory original mirror The plate on the windshield
CAUTION!
NOTE: Always use caution, DO NOT force the mount. We will not be responsible for broken windshields. If you
are not sure how to remove or re-install the mirror seek trained, qualied help.
Dangerous
Ok
Windshield
Windshield
Dangerous
Ok
1. 2.
Different cars have different brackets. It depends
on your vehicle maker and manufacturer.There are
many methods to remove the original rear view
mirror, however, please don’t force the mirror off
the bracket.
The manufacturer will not be responsible for
damage caused to your car by wrong installation of
the mirror.
Install mirror monitor on the plate
Install rear view mirror along this directionTake down your original mirror, and make
the mirror monitor ready
windshield
Please make sure to install the mirror to
the end of the bottom without any loose
Contrarotate the xed rear view mirror
Torque is about 0.8-1.3 N.m
windshield
windshield
Caution: Do not force mount
The view can be changed with triggers or manually with the wire
control.