Manual

49
Motion Detection
From the Motion Detection menu, you can select two points as diagonals to
define a detection area. Within the user defined area, when there is an
object moving, the system will issue an alarm.
You can search motion detection alarm events under "Configuration -> Log
Search", naming "CHL MD alarm".
• From the Alarm setup menu, select Motion.
To set the detection area:
1. Select the first block (yellow), and the motion block changes to blue after
pressing the "Enter" key.
2. Select the second block and press the "Enter" key. The rectangular area
formed by the diagonal of these two blocks is defined.
3. Select Return to return to the previous menu and press the Save key.