Manual

10
Installation
Installation Environment and Safety Precautions
To extend service life, attempt to install the device in a place where vibration is weak.
Do not install the device in a poorly-ventilated area (such as trunk).
The device must be installed horizontally in a location protected against water, humidity, and lightning.
8V-36V DC power supply is used for this device. Note the positive and negative terminals during connection to
prevent short circuit.
Always power the device off before connecting any peripheral.
Do not touch the power supply and the device with wet hands.
Do not spray liquid on the device to prevent internal short circuit or fire.
Do not place any other device directly on top of the camera.
To avoid damage or electric shock, do not disassemble the housing.