Instruction Manual

- 53 -
1.8.1 SYSTEM INFO, PG 1 OF 2
The 1.8.1 SYSTEM INFO screen is one of two sequentialscreens to display the current MDVR system
settings, real time operational status and optional business contact information. A compatible monitor must
be properly connected and configured to either of the MDVR Rear or Front Monitor ports.
INFO
Press to view PG 1 of the System Info screens.
NEXT
Select and press ENTER to view 1.8.2 SYSTEM INFO PG 2
RETURN
Press to return to the previous page
Note: For Status Report purposes only. No User entry
SW
Software Version
HW
Hardware Version
SERIAL-NUM
Serial Number
MCUVER
Micro Control Unit
IMEI
The ID of the MDVR Cellular Modem Option when installed and enabled within
the MDVR for communication with the IVMS Server. It is automatically displayed
if an active SIM Card is installed.
DISK TEMP
Internal Temperature reading of DISK
SPEED
Vehicle Speed (should read ‘0’ if the vehicle is properly parked)
GPS-M
Invalid/valid?
PLUS NUM
Pulse number
3G/4G-M
Cellular Option installed?
SIM CARD
SIM Card installed(NONE/EXIST)?
WIFI-M
WIFImode(NONE/EXIST)?
CENTER-L
Central Monitoring Station Linked?
INTERCOM-L
Intercom Station Linked?
COM 1
DEVICE
Serial Port 1 (Device Connected)
GPS-SIGN
Current GPS Longitude/Latitude reading
INTERCOM-ID
Intercom device ID number?
3G-STATE
CellularStatus
SIM-SIGN
SIM Signal reading
WIFI-SIGN
WIFI Signal reading
SENSOR IN
STATUS
Status of 8 SENS IN channels. ALARM status is indicated by white letters on red
background
SETUP MENU 1.8
'SYSTEM INFO'
SYSTEM INFO
1.8.1
SYSTEM INFO PG
2 'NEXT'
Mobilemule™