Instruction Manual

- 41 -
1.5.1.1 CONFIGURATION
The 1.5.1.1CONFIGURATION screen allows the user to copy the basic system settings from one MDVR and
transfer (Export) them to another MDVR using an USB flash drives.
EXPORT CONFIG FILE
Select to copy this MDVRs system settings to an USB flash drivesfor use
as backup or to easily setup another MDVR:
1. Insert the USB flash driveson the front panel
2. Select EXPORT CONFIG FILE button
3. Remove USB flash drives
IMPORT CONFIG FILE
Use to copy the above MDVRs system settings to the one to be
programmed.
1. Ensure MDVR is powered Off and in UNLOCK position
2. Insert USB flash drives containing the EXPORT CONFIG FILE
3. Close the Security Door and turn Key to the 'LOCK’ position
4. MDVR will start up and automatically copy the settings on the USB
flash drivesand complete the startup process
5. When the Camera Screen appears Turn Key to ‘UNLOCK’ position
6. Open Security Door; remove the USB flash drives
RESET TO DEFAULT
（DEFAULTCONFIG）
Resets MDVR to the original factory settings and permanentlydeletes any
other settings. The SYSTEM will prompt you toreconfirm prior to
completing the reset to original settings
CHANGE LOGO
(UPGRADE LOGO)
Add or upgrade a logo to be displayed on the MDVRs LCDMonitor during
the start up process
SETUP MENU 1.5
'TOOLS'
TOOLS 1.5.1
'CONFIGURE'
CONFIGURE 1.5.1.1
'CONFIGURATION'
Mobilemule™