Instruction Manual

- 30 -
1.3.5.1.1 ADD IP CAMERA
The 1.3.5.1.1 ADD IP CAMERA screen allows authorized Users to add and search for connected IP
Cameras. The IPC to be added needs to be the same as the MDVR's IP gateway
To add an IP Camera:
READ
Read and understand the IP Camera User Guide included with the product
CONFIGURE
Setup the camera parameters as necessary
CONNECT
Plug the IP Camera cable from the camera into the RJ45 jack on the rear of the
MDVR
SEARCH
Select, then:
ENTER
Press. The MDVR will search for a correctly connected IP Camera and will auto
fill and display the units Channel, IP Address and Port. If no IP Camera is
detected a ‘NO IP CAMERA FOUND’ message will appear on screen
USER NAME
Enter User Name
PASSWORD
Enter Users 6 digit Password (Numbers only)
IP Camera Data Fields:
IPC CHANNEL
Auto fill (No User entry)
IP ADDRESS
Auto fill (No User entry)
PORT
Auto fill (No User entry)
Confirm the new settings are correct and save the file.
Action Bar Keys (Select, then press ENTER):
SEARCH
To search for connected IP Camera
SAVE
To save and the 1.3.5.1 IP CAMERA SETUP screen will appear
SETUP MENU 1.3
'RECORD'
RECORD 1.3.5
'IP CAMERA'
IP CAMERA 1.3.5.1.1
'ADD'
ADD IP CAMERA
1.3.5.1.1
Mobilemule™