Instruction Manual

Rear View Safety

Pairing:

1) Use "right and left" buttons to toggle and select the channel

you want to pair.

2) Press "Home" to open menu and press "Home" (a second time)

to start "pairing mode". System will count from 50 seconds.

"Pairing mode" will last approximately 50 seconds.

3) Press pair button on back of camera within 50 seconds (step 2)

and camera image will appear. The system is paired.

NOTE: Make sure camera is receiving power when you pair. TIP:

If 50 second countdown does not appear, be sure to press the

menu button lightly.

Pairing

PAIRING