Instruction Manual
Reverse With Condence ™
9
Camera Connection:
Locate the clearance lights wiring on your vehicle. You may need
to remove the interior panel in order to locate. Connect the
power cables for camera: Red wire to light's positive; Black wire
to chassis ground.
Monitor Connection:
Cigarette lighter adapter: firmly insert the lighter plug to the
cigarette lighter socket.
Loose lead wire: To power the system connect the power (RED)
V + wire to ignition power and the ground (BLACK) wire to the
chassis ground. These are the only wires needed to power the
system. Press power and "arrow" keys to toggle between
different views.
Three positive trigger wires (BLUE-CH, YELLOW-CH, WHITE-
CH) represent a channel and activate when trigger wire con-
nects to V.
"CAM2" is the designated backup channel. To have the backup
camera display when going in reverse, connect the BLUE wire
to reverse power (or any power source that comes on only in
reverse). The other channels can similarly be triggered (i.e. side
cameras can be triggered by the turn signals, etc.)
DO NOT INSTALL monitor where it may obstruct driver view or
obstruct air bag devices.
INSTALLATION GUIDE