Manualshelf

Installation Manual

ManualsBrandsRVS Systems ManualsSecurity Cameras7" Quad View Monitor with DVR, 2 x Wireless Backup Cameras and Both Side Cameras
11121314151617181920
Table Of Contents
REAR VIEW SAFETY
12
Pairing
Pairing
1. Use the "right and left" arrow buttons to toggle through the
channels and select the channel you want to pair to.
2. Press "Home" to open the menu and press "Home" again to
initiate "pairing mode". You will see the system start counting
down from 50 seconds. Once "pairing mode" is active it will
last for 50 seconds.
3. Press the pair button on the back of the camera within the
50 seconds and the camera image will appear on the monitor.
The system is paired. NOTE: Please make sure the camera is
receiving power when you pair. TIP: If the 50 second countdown
does not appear, be sure to press the menu button lightly.