Installation Manual

Troubleshooting
REAR VIEW SAFETY
18
Monitor Displays Blue Screen & Displays No Signal
• Do a hard reset, unplug all
cables and power cables leave
out for 1 minute and then
re-connect them.
• Check to ensure that the con-
nection to the camera is tight.
No Image On Screen
• Verify camera is on correct
camera input
• Verify camera is connected
to power/ground
Audio on Camera
• Verify chosen camera has audio • Verify volume setting
Signal Issues
• The antenna booster is an
extendable antenna that can be
used in case of signal issues.
• The cable is attached just like
the standard antenna by
screwing on the connection-
The antenna itself is attached
magnetically.