RVS-02-360-4-Calibration-Guide
Table Of Contents
- Introduction to Calibration
- Calibration Kit Components
- Placing Calibration Pads
- Connecting Peripherals for Accessing and Navigating the GUI
- Connecting a Monitor
- Verifying Calibration Pad Placement
- Logging In
- Automatically Calibrating
- Refining the Calibration
- Exiting the Calibration View
- Verifying that Calibration was Successful
- InView 360 HD Customer Support
© Rear View Safety | All rights reserved
p. 8
Logging In
1. Right-click anywhere on the screen or press
Enter on the remote, then select Login�
2. Select Yes when asked if you want to proceed
with stopping the recorder�
3. Double-click in the input eld to open the
virtual keyboard, and then enter the default
password: 88888888 (8 number eights).
4. Click OK with the mouse or press Shift + OK
on the remote�
The Main Menu opens�
Automatically Calibrating
1. Click to select AVM (or use Shift to cycle through options to nd AVM and then press Enter to select), then select
Automatic Calibration in the AVM Calibration menu�
The Automatic Calibration window opens�
This window displays the four camera
views with a Units Setup conguration
window on top�