User Manual

ManualsBrandsRVS Systems ManualsCamera & PhotoBlackVue 128GB 1 Channel Dash Camera (Wi-Fi)

Table Of Contents

Introduction
Important safety information
Overview
- In the box
  - At a glance
    - Front camera
    - Removing and inserting the front camera
Installation
- Installing the BlackVue dashcam
Playing and Managing Videos
- Playing and managing video files using your smartphone (Android/iOS)
- Playing and managing video files using your computer (Windows/Mac)
Tips for optimal performance
- Formatting the microSD card
- Upgrading the firmware
  - Upgrading the firmware using an iOS or Android device (Firmware Over The Air)
  - Upgrading the firmware using a computer (Windows or Mac)
Changing settings
- Changing settings using your smartphone (Android/iOS)
- Changing settings using your computer (Windows/Mac)
  - BlackVue Viewer settings
  - Firmware settings
About the Cloud Service
- Connect to BLACKVUE CLOUD (Optional)
Optional accessories
- Parking mode hardwiring kit (Optional)
- Parking mode battery pack (Optional)
Troubleshooting
- Changing / resetting direct Wi-Fi SSID and password
Product specifications
Recording time
Disposal and recycling information

14

BLACKVUE

2

Peel o the protective lm from the double-sided tape and attach the dashcam to the windshield behind the rear-view mirror.

3

Adjust the angle of the lens by rotating the body of the dashcam. We recommend pointing the lens slightly downwards (≈10° below

horizontal), so as to record video with a 6:4 road to background ratio.

4

Plug the power cord into the cigarette lighter socket and the dashcam.

5

Use the pry tool to lift the edges of the windshield trim/molding and tuck in the power cord.