Product Manual

Installing your RV Wi-Fi+ without the external antenna
Set up for use with
NO external antenna
1
Choose a position for RV WI-FI+ Router
adjacent to a single 12v power point;
2
Screw the four black antenna into the
four points - Wi-Fi/ 4G/ 3G/ Wi-Fi. 2.4
labled into the WIFI ports and 4.0/LTE
labeled into the 3G/4G ports
3
Plug the power adaper into the power
jack of the RV WI-FI+ Router;
4
Remove the middle Noosey Sim adapter
from the pack. Insert an activated and
credit loaded Nano SIM into the middle
adapter in the pack and place in the
SIM card slot. Failure to use this adapter
will result in connection issues.
5
Place the power cord into the 12v
power point and turn on. Sim must be
inserted prior to turning on or a reboot
will be required.
6
Ensure the ‘Power light is on.
1
Place the end of the power adapter into
the ‘Power’ slot.
Turning on your RV Wi-Fi+ Router
2.4
2.4 4.0
4.0
Insert the middle adapter from the
adapter pack with a Nano sized sim
into the sim card slot.