User guide

Parts
Antenna
Other Hardware
Specifications
VHF/UHF Amplified antenna:
Height: 7”; Weight: 4.5 lbs
UV-protected plastic dome
Operating Voltage: 10 – 13.8 VDC
Operating Current:
Park Cable Mode (Off): 10 mA
Active: 500 mA
Sleep Mode: 80 mA
For outdoor use only.
Removing Existing Over the Air
Antenna
(Aftermarket models only)
If removing an existing antenna, supplied with this
antenna is a roof cover plate and ceiling cover plate.
Make sure to properly seal the roof plate to the roof,
including around the supplied grommet. The ceiling
plate can mount to ceiling after removing existing
crank handle. Mount the ceiling plate bracket to
ceiling with 2 screws. Ceiling plate is paintable, if
desired.
Top View
18.75″
18.5″
7″ ht.
Control panel
2 Wall plate screws
2 Terminal insulators
Single entry cable entry plate
16 Mounting screws
(9 for antenna feet,
7 for cable entry plate)
Winegard Rayzar Automatic Antenna
Page 1
20′ Coax Cable
72″ Coax Cable
Ceiling plate
Ceiling plate bracket
Roof plate