Automatic Amplified Local Broadcast HD TV Antenna User Guide For Rayzar Automatic Antenna Models RZ-7500 / RZ-7535 / RZ-8500 / RZ-8535 For French and Spanish versions, FAQs, troubleshooting, videos, and product information visit www.winegard.com/rayzarauto For help, email help@winegard.
Parts Specifications Antenna VHF/UHF Amplified antenna: Height: 7”; Weight: 4.5 lbs UV-protected plastic dome Operating Voltage: 10 – 13.8 VDC Operating Current: Park Cable Mode (Off): 10 mA Active: 500 mA Sleep Mode: 80 mA Other Hardware For outdoor use only. Removing Existing Over the Air Top View 18.75″ Ceiling plate 18.5″ Roof plate Ceiling plate bracket Single entry cable entry plate 7″ ht.
Installation Front of vehicle ≥24″ to front of vehicle Installing the Antenna Warning: Warning: install Install in dry in dry conditions conditions only! only! 1. Choose a location on the roof of the RV that meets the following requirements: ≥12″ to edge of vehicle ▪ Has a minimum roof space of 18.5” x 18.
Routing Cables 4. If hooking up a cable input, connect the cable from the cable input to the “CABLE IN” port on the back 1. Connect the included coax cable to the F-jack on the of the control panel. antenna base. 5. Run two #12 wires between the control panel and Note: a 20 foot coax cable is included and +12 VDC source, and route downlead cable to the recommended for use with the antenna. Longer chosen location for the control panel.
Installing a Connector on Coax Cable FCC Guidelines Tip: If installing the connector in hot weather, Changes or modifications not expressly approved increase dimensions by ¼”. by Winegard could void your authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. 1. 2. 3. 4.
Operation power on process. At this time the antenna amplifier is powered on and TV antenna signals will be Warning: This antenna is designed to passed. Initially, GREEN “Positional LED(s)” will be lit be used directly with a television.Operators to indicate the direction the antenna is positioned.
other channels found at alternate positions. Pressing Sleep Mode the Search button again will move the antenna to the next best location. Continuing to press While in Antenna Mode, if no buttons are pressed Search again will cycle through other positions that for 3 minutes, the system will enter into Sleep provided additional channels, until returning to the Mode. During Sleep Mode the POWER LED will main search location.
WINEGARD MOBILE PRODUCTS LIMITED WARRANTY (2 YEARS PARTS; 1 YEAR LABOR) Winegard Company warrants this product against defects in materials or workmanship for a period of two (2) years from the date of original purchase. During year one (1) of such warranty, Winegard Company will also pay authorized labor costs to an authorized Winegard dealer to repair or replace defective products.
