Product Manual

Troubleshooting
Before going through the check list, check the unit’s wiring. If any
problems persist after reviewing the check list, please consult your
nearest Camec dealer.
No power or no sound
Noise in radio broadcasts
Cannot play disc
12V system power not turned on.
Signal is too weak. Select other stations with stronger signals.
12V power not properly connected. Check wiring.
Check the connection of the RV antenna.
Fuse is blown. Check wiring then replace the fuse.
Change the (FM) broadcast from Stereo to mono.
Volume is in minimum. Adjust volume to a desired level.
If the above solutions do not help, press the RESET button (see E-3).
The CD Skips tracks
Preset stations lost
Display shows ERR-1
Display shows ERR-3
Display shows ERR-5
Disc cannot be ejected.
Ensure that the CD is not damaged or dirty.
Battery or power supply has been disconnected from the unit.
Press the QT button to store the 6 strongest stations.
The disc, USB or SD device cannot be read in two minutes.
USB/SD data error.
Communication error or a component is faulty. Please return
Disc is upside down. Ensure the printed side is facing up.
Press and hold the button.
Ensure that random mode is deactivated.
Disc may be upside down. Ensure the printed side is facing up.
Disc is dirty. Clean the disc with a
the disc outwards from the center.
clean, soft, lint-free cloth. Wipe
Disc is defective. Try another disc.
Incompatible disc is used. Try another disc.
Disc rating exceeds the restriction setting.
rating.
Change the parental
Disc region code is not compatible with
proper region code (Aus/NZ region code is 4).
the unit. Use a disc with
E - 15
to your dealer for service.