Installation Guide

ManualsBrandsRuvati ManualsKitchen28 in. Single Bowl Undermount 16-Gauge Stainless Steel Ledge Kitchen Sink with Sliding Accessories

RUVATI USA

www.ruvati.com

Dimensions

RVH8309

Model

Number Width Length Depth

RVH8309 28” 19” 10”

Rev 12/11

Printed in USA

Page 1

Features

In the Box

•

Sink

•

Sapele wood cutting board

•

Stainless Steel deep colander

•

Stainless steel and silicone roll-up dish drying rack

• Bottom rinse grid, basket strainer drain

•

Mounting brackets and cut-out template

• 16 gauge stainless steel

• Premium 304 grade stainless steel

(18/10 Chromium/Nickel)

• Luxurious satin nish - Easy to clean

and long-lasting

• Heavy duty sound guard padding and

undercoating

• Slanted bottom with elegant drain

grooves for easy draining

• Tight radius corners for easy cleaning

• Drain placement - Rear

• Slanted side platform provides

convenient work area

• Lips on two sides to provide track for

cutting board

Undermount Stainlesss Steel

Kitchen Sink Single Bowl

Summary of content (4 pages)

PAGE 1
® RVH8309 Undermount Stainlesss Steel Kitchen Sink Single Bowl Features • • • • • • • • • 16 gauge stainless steel Premium 304 grade stainless steel (18/10 Chromium/Nickel) Luxurious satin finish - Easy to clean and long-lasting Heavy duty sound guard padding and undercoating Slanted bottom with elegant drain grooves for easy draining Tight radius corners for easy cleaning Drain placement - Rear Slanted side platform provides convenient work area Lips on two sides to provide track for cutting board In t
PAGE 2
® RVH8309 Attention Installer 1. Read these instructions carefully before installation. Inspect sink for damages. Do not install if the sink is damaged. 2. Ruvati recommends that installation of undermount sinks be done by a professional installer. 3. Templates are only provided as a guide. Place template on sink to ensure the template will give you the proper cutout for the sink. Ruvati is not responsible for improper sink or countertop installation.
PAGE 3
® RVH8309 Installation NOTE: The following instructions are for wood countertops. For granite, marble or solid stone countertops, ask your fabricator for installation instructions. 1. Place template on countertop. Position it such that the sink will have proper clearance from cabinet. 2. Trace a line around the template. Determine what “reveal” you want your sink to have (see previous page) and based on that, adjust the line accordingly. Cut along the line. 3.
PAGE 4
® RVH8309 Care and Maintenance • Clean regularly with normal detergent and warm water. • Always make a habit of drying your sink after use and buffing with a soft cloth. This will ensure that no build up of limescale or other mineral deposits can occur. • Clean the sink once a week using a nonabrasive cleanser such as Comet and a clean soft sponge. Scrub in the same direction as the natural grain of the sink. • Never let soap or other household cleaners to dry on the surface of the sink.