Technical Specifications

C
5-3/4"
3/4" NPT
ECLIPSE
A
B
Recommended Specifications
(for trade reference only)
Water heater(s) shall be model ________________________,
manufactured by Rheem, having electrical input of
______________ kW and a recovery rate of GPH at a 100°F
temperature rise. Water heater(s) shall have a storage
capacity of ____________ gallons.
Water heater(s) shall be constructed of a inner liner
poloybutene-1 and shall come with a 10 year warranty. Water
heater shall have a maximum weight of 160 lbs and include a
terminal block for non-sim / sim conversions. Water heater(s)
shall have the UL seal of certification and be factory equipped
with an CSA/ASME rated temperature and pressure relief
valve. Tank(s) interior shall be coated with a high temperature
porcelain enamel and furnished with a magnesium anode rod
rigidly supported. Water heater(s) shall meet or exceed the
energy factor requirements of ASHRAE. Tanks shall have a
working pressure rating of 150 psi, and shall be completely
assembled. Water heater(s) shall be equipped with copper,
resistored, “screw-in” type elements. Tank shall be insulated
with 2-1/2" of rigid polyurethane foam insulation. Water
heater(s) shall be equipped with surface mounted thermostats
each with an integral, manual reset, high limit control. Water
heater(s) shall be covered by a three year limited warranty
against tank leaks.
Marathon
®
Eclipse
™
Light Duty Specifications
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
T
Y
P
E
GALLON
CAPACITY
MODEL
NUMBER
RECOVERY
IN G.P.H.
100° F RISE**
FIRST HOUR
DELIVERY
G.P.H.
TANK
HEIGHT
A
HEIGHT TO
WATER CONN.
B
DIAMETER
C
APPROX.
SHIP WT.
(LBS.)
Tall 75 MELD75-TB 49 78 58-5/8 62-5/8 28-1/4 128
Tall 85 MELD85-TB 49 91 66-1/4 70-1/4 28-1/4 140
Tall 105 MELD105-TB 49 104 66-3/4 70-3/4 30-1/4 152
**Recovery Capacity is based upon a 100° F water temperature rise and calculated per ANSI Z21.10.3 standards
• Maximum test pressure: 300 PSI; Maximum working pressure: 150 PSI
All Marathon Eclipse Light Duty models are available in 6/6 simultaneous configurations with terminal block in both
fused and non-fused configurations. All water heaters with power requirements over 48 Amps come Standard in
the fused configuration.
FACTORY SHIPPED RATING AMPS AND OTHER RATED VOLTAGES
VOLTS 277 277 240 240 208 208
OPERATION Sim Non-Sim Sim Non-Sim Sim Non-Sim
PHASE 1-PH 3-PH 1-PH & 3-PH 1-PH 3-PH 1-PH & 3-PH 1-PH 3-PH 1-PH & 3-PH
RATING 12100 12100 6050 9080 9080 4540 6820 6820 3410
BREAKER 60 50 30 50 45 25 45 35 20
SIZE 208V 240V 277V 480V
SIM OR
NON-SIM
6/6 6/6 6/6 6/6
75
✓ ✓ ✓ ✓
85
✓ ✓ ✓ ✓
105
✓ ✓ ✓ ✓
277 Volt Rated Water Heaters
MELD Factory Models
Consult factory for certification requirements.
• All models are factory shipped with sim configuration.
Ruud Commercial Electric
Light-Duty Water Heaters
2
Ruud Water Heating • 1115 Northmeadow Parkway, Suite 100, Roswell, Georgia 30076 • www.ruud.com
PRINTED IN U.S.A. 12/17 WP FORM NO. RR102CE-RMELD
In keeping with its policy of continuous progress and product improvement, Ruud reserves the right to make changes without notice.