SDS
4. FIRST AID MEASURES
EYES: Immediately flush eyes with plenty of water. After initial flushing, remove contact lenses and continue flushing for at least
15 minutes. If effects occur, consult a physician, preferably an ophthalmologist. May cause injury due to mechanical action.
SKIN: Wash with plenty of water. Get medical attention if irritation develops or persists.
INGESTION: If swallowed, seek medical advice immediately.
INHALATION: Remove to fresh air. Seek medical attention if cough or other symptoms develop or persist.
5. FIRE FIGHTING MEASURES
FLAMMABLE CLASS: NA = Not Applicable.
EXPLOSION HAZARDS: NA = Not Applicable.
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Absorb spilled material and place in appropriate container for disposal.
7. HANDLING AND STORAGE
HANDLING: Use with adequate ventilation. Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Wash
thoroughly after handling. Keep away from food and drinking water.
STORAGE: Keep container closed to prevent drying out.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS: A system of local and/or general exhaust is recommended to keep employee exposures as low as
possible.
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Wear safety glasses with side shields. Chemical splash goggles and face shield (ANSI Z87.1 or approved
equivalent) are recommended.
SKIN: Wear protective clothing, including long sleeves and gloves, to prevent skin contact. Thoroughly wash clothing before
reuse.
RESPIRATORY: In case of insufficient ventilation, wear suitable respiratory equipment.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Thick paste
ODOR: Mild, not unpleasant.
ODOR THRESHOLD: Not Available
pH: Not Available
FLASH POINT AND METHOD: NA = Not Applicable.
FLAMMABLE LIMITS: NA = Not Applicable.
AUTOIGNITION TEMPERATURE: NA = Not Applicable.
VAPOR PRESSURE: Negligible
VAPOR DENSITY: > 1 (air=1)
BOILING POINT: Not Available
FREEZING POINT: Not Available
MELTING POINT: Not Available
THERMAL DECOMPOSITION: Not Available
SOLUBILITY IN WATER: Insoluble
PARTITION COEFFICIENT: N-OCTANOL/WATER: Not Available
EVAPORATION RATE: Not Available
Page 3 of 5
High Heat Silicone