SDS

4. FIRST AID MEASURES
EYES: Immediately flush eyes with plenty of water. Get medical attention, if irritation persists.
SKIN: Wash with plenty of water. Get medical attention if irritation develops or persists.
INGESTION: If swallowed, seek medical advice immediately.
INHALATION: Remove to fresh air. Seek medical attention if cough or other symptoms develop or persist.
5. FIRE FIGHTING MEASURES
FLAMMABLE CLASS: NA = Not Applicable.
EXPLOSION HAZARDS: NA = Not Applicable.
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Absorb spilled material and place in appropriate container for disposal.
7. HANDLING AND STORAGE
HANDLING: Use with adequate ventilation. Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Wash
thoroughly after handling. Keep away from food and drinking water.
STORAGE: Keep container tightly closed and in a well-ventilated place. Keep container dry.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Wear safety glasses with side shields. Chemical splash goggles and face shield (ANSI Z87.1 or approved
equivalent) are recommended.
SKIN: Wear protective clothing, including long sleeves and gloves, to prevent skin contact. Thoroughly wash clothing before
reuse.
RESPIRATORY: Good general ventilation should be sufficient to control airborne levels.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Thick paste
ODOR: Acetic acid
ODOR THRESHOLD: Not Available
pH: 5 to 7
FLASH POINT AND METHOD: NA = Not Applicable.
FLAMMABLE LIMITS: NA = Not Applicable.
AUTOIGNITION TEMPERATURE: NA = Not Applicable.
VAPOR PRESSURE: Negligible
VAPOR DENSITY: Not Available
BOILING POINT: NA = Not Applicable.
FREEZING POINT: Not Available
MELTING POINT: NA = Not Applicable.
THERMAL DECOMPOSITION: Not Available
SOLUBILITY IN WATER: Insoluble
PARTITION COEFFICIENT: N-OCTANOL/WATER: Not Available
EVAPORATION RATE: Not Available
DENSITY: Not Available
SPECIFIC GRAVITY: 1.03
VISCOSITY: Not Available
Page 3 of 5
Silicone Sealant