SDS

ManualsBrandsRutland ManualsFireplace Accessories & Parts10.3 fl. oz. 500°F RTV High Heat Silicone (Clear) Cartridge

Clear Silicone Sealant, 500 F High Heat RTV

Safety Data Sheet

Percentages withheld, Trade secret.

Chemical Ingredients:

CAS# Chemical Name:

7631-86-9

64742-46-7

70131-67-8

Silica, amorphous

Distillates, petroleum,

hydrotreated middle

Siloxanes and Silicones, di-Me,

hydroxy-terminated

FIRST AID MEASURES

Inhalation: Remove to fresh air. Seek medical attention if cough or other symptoms develop or persist.

Skin Contact: Wash with plenty of water. Get medical attention if irritation develops or persists.

Eye Contact: Immediately flush eyes with plenty of water. After initial flushing, remove contact lenses and continue flushing for at

least 15 minutes. If effects occur, consult a physician, preferably an ophthalmologist. May cause injury due to

mechanical action.

Ingestion: Not a direct hazard. Not considered dangerous. Bring to the attention of a physician.

FIRE FIGHTING MEASURES

Flammability: Not classified as a flammability hazard.

Flash Point: > 100 C (212 F)

Burning Rate: Not Available

Flash Point Method: Closed cup

Autoignition Temp: Not Available

Use regular dry chemical, alcohol resistant foam, carbon dioxide or water - choose the one most appropriate for type of surrounding fire.

ACCIDENTAL RELEASE MEASURES

Absorb spilled material and place in appropriate container for disposal.

HANDLING AND STORAGE

Handling Precautions: Use with adequate ventilation. Avoid contact with eyes. Avoid prolonged and repeated contact with skin.

Wash thoroughly after handling. Keep away from food and drinking water.

Storage Requirements: Keep container closed to prevent drying out. Store in a cool, well ventilated area.

EXPOSURE CONTROLS/PERSONAL PROTECTION

Engineering Controls: A system of local and/or general exhaust is recommended to keep employee exposures as low as

possible.

Personal Protective

Equipment:

Wear protective clothing, including long sleeves and gloves, to prevent skin contact. Thoroughly wash

clothing before reuse.

PHYSICAL AND CHEMICAL PROPERTIES

Appearance: clear, translucent paste

Molecular Formula:Not Available Not Available

Not Available

1.007

Not Available

Solubility:

Softening Point:

Percent Volatile:

Heat Value:

insoluble

Not Available

Odor Threshold:

Particle Size:

Spec Grav./Density:

Viscosity:

Saturated Vapor

Concentration:

Physical State: Odor:Paste Acetic Acid

Revision Date: 10/6/2021SDS Number: 35 Page: 2 / 4