SDS

Cement Floor Sealer
Safety Data Sheet
5
FIRE FIGHTING MEASURES
Flash Point: None
Burning Rate: Not Applicable
Flash Point Method: Not Applicable
Autoignition Temp: Not Applicable
Use any standard agent - choose the one most appropriate for type of surrounding fire.
6
ACCIDENTAL RELEASE MEASURES
Absorb spilled material and place in appropriate container for disposal.
7
HANDLING AND STORAGE
Handling Precautions: Avoid contact with eyes and skin. Use in a well-ventilated area. Avoid inhalation of vapors and mists.
Storage Requirements: Keep container closed to prevent drying out.
8
EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls: A system of local and/or general exhaust is recommended to keep employee exposures as low as
possible.
Personal Protective
Equipment:
EYES AND FACE: Wear safety glasses with side shields. Chemical splash goggles and face shield
(ANSI Z87.1 or approved equivalent) are recommended.
SKIN: Wear protective clothing, including long sleeves and gloves, to prevent skin contact. Thoroughly
wash clothing before reuse. RESPIRATORY: In case of insufficient ventilation, wear suitable respiratory
equipment.
9
PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Clear to opaque
Molecular Formula:Not Available Not Available
Not Applicable
1.32 to 1.61
Not Available
Not Available
(214 - 216) F
Not Available
Not Available
Not Available
11
Not Available
Not Available
Not Available
Solubility:
Softening Point:
Percent Volatile:
Heat Value:
Freezing/Melting Pt.:
Flash Point:
Octanol:
Vapor Density:
VOC:
Bulk Density:
Auto-Ignition Temp:
UFL/LFL:
Soluble in water
Not Available
Not Available
Not Available
30 F
Not Available
Not Available
Not Available
Not Available
11.0 to 13.4
Not Available
Not Available
Odor Threshold:
Particle Size:
Spec Grav./Density:
Viscosity:
Saturated Vapor
Concentration:
Boiling Point:
Flammability:
Partition Coefficient:
Vapor Pressure:
pH:
Evap. Rate:
Molecular weight:
Decomp Temp:
Physical State: Odor:Liquid None
Revision Date: 5/6/2019SDS Number: 1 Page: 3 / 4