SDS

5. FIRE FIGHTING MEASURES

FLAMMABLE CLASS: Non-Flammable

EXPLOSION HAZARDS: NA = Not Applicable.

6. ACCIDENTAL RELEASE MEASURES

SMALL SPILL: With shovel or scoop, place material into clean, dry container; move containers from spill area. Minimize airborne

particulates. Protect against inhalation of dusts. Wear gloves and long sleeves. Avoid contact with skin. Use eye protection.

7. HANDLING AND STORAGE

GENERAL PROCEDURES: Avoid contact with eyes, skin, and clothing.

HANDLING: Use with adequate ventilation. Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Wash

thoroughly after handling. Keep away from food and drinking water.

STORAGE: Keep in a cool, well ventilated place

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

EXPOSURE GUIDELINES

OSHA HAZARDOUS COMPONENTS (29 CFR1910.1200)

EXPOSURE LIMITS

Chemical Name Type ppm mg/m

Silica, Crystalline

OSHA PEL TWA 250mpp 10

ACGIH TLV TWA 0.025

Supplier OEL

TWA NL NL

STEL NL NL

ENGINEERING CONTROLS: A system of local and/or general exhaust is recommended to keep employee exposures below the

Airborne Exposure Limits.

PERSONAL PROTECTIVE EQUIPMENT

EYES AND FACE: Wear safety glasses with side shields. Chemical splash goggles and face shield (ANSI Z87.1 or approved

equivalent) are recommended.

SKIN: Wear protective clothing, including long sleeves and gloves, to prevent skin contact. Thoroughly wash clothing before

reuse.

RESPIRATORY: In case of insufficient ventilation, wear suitable respiratory equipment.

Page 3 of 5

Replacement Silica Sand