Compatibility Chart

DIY DOOR SYSTEM Assembly Instructions

Figure 1

Tongue and Groove

Tongue refers to the ridge extending beyond the main portion

of the slat. Groove refers to the slot cut into the other side of the

slat.

By Definition:

Tongue

Groove

1. On a at, clean, surface, lay slats upside down with the groove facing toward the

bottom of the door assembly. Assemble by tting the tongue into the groove of each

piece, tapping them together with a rubber mallet (Figure 1).

1. On a at, clean, surface, lay slats upside down with edges pressed together (Figure 1).

FOR TONUGE & GROOVE ASSEMBLY

FOR PLANK ASSEMBLY