Compatibility Chart

DIY DOOR SYSTEM Assembly Instructions
4
Use teamwork - We recommend
two people for this build.
THIS KIT IS AN ENABLER
You have complete creative control over the kind of wood and nish you would like to
use in your door. at being said, take into consideration wood thickness and length.
e wood you choose should not be more than 3/4” in thickness to t in the stiles. It is
recommended that planks should be tongue and groove for greater strength, but it is
not necessary. Also remember that the length will be determined by the size of doorway
being covered. We recommend plank widths of no more than three feet to avoid wood
warping and damaging the stiles.
FIRST THINGS FIRST
NOTE:
Always alternate the direction of the wood grain when assembling slats. is will add
strength to the assembly and help prevent warpage.
NOTE:
is DIY kit comes in various sizes. e instructions have been written for the average
single door size; but larger doors may need more wood and fastener parts.
NOTE:
e following should be a ‘dry’ assembly. Do
not use adhesives in when putting this door
together.