Installation Guide

ManualsBrandsRustica Hardware ManualsDoor Knobs & Hardware48 in. Flat Black Privacy Industrial Right Handed Handle System

1

2

3

4

5

6

7

8

9

RUSTICA LOCK Assembly Instructions

25. Hook the top end of the

lock rail up into the top latch

assembly. e hook will rest

on the top of the lower rivet

(Figure 14A).

NOTE:

If the lock latch is not latching

over the stop, adjust the stop by

loosening the lag bolt and the four

adjustment screws on the door

stop, then sliding the stop up or

down. Re-tighten the lag bolt and

adjustment screws.

24. Ensure the lock mechanism

is in the locked position

(Figure 14A).

Figure 14A

Figure 14B

26. Fasten the rail to the lock

using two pan head phillips

screws (provided) Figure 14B.

3

03

2017

VERSION

RUSTICAHARDWARE.com

9