Installation Guide

RUSTICA LOCK Assembly Instructions
Figure 12
10-32 Phillips
Screws
Cosmetic
Plate
Lock
Back
Door
Lock
Front
Flat Head
Phillips Screws
19. Insert the lock back into the hole
on the back of the door (Figure 12).
20. Insert the front of the lock through
the hole in the front of the door
(Figure 12).
18. Install the cosmetic plate on the
back of the door lock using two 10-
32 screws (provided).
21. Secure to the back of the door lock
using two 10-32 screws (provided)
from step 14.
23. Install rail guides onto the rail by
sliding the rail guides over the top of
the rail (Figure 13).
Figure 13
Rail Guides
Rail
3
03
2017
VERSION
RUSTICAHARDWARE.com
8
22. Fasten the lock in place with two
at head phillips screws (provided).
LOCK INSTALLATION
RAIL INSTALLATION