Installation Guide

RUSTICA LOCK Assembly Instructions
3
03
2017
VERSION
RUSTICAHARDWARE.com
5
Figure 2
Figure 3
Figure 4
LATCH INSTALLATION
6. Lay the door on a at, stable surface
ensuring the side the latch is to be installed on
is facing up (Figure 3).
5. For existing tracks with door stops (H),
ensure the door stop is installed on the side
the door will lock. For new tracks, select the
side the door will lock and install the door
stop using the lag bolt and washer provided
with the track system (Figure 2).
7. Position the latch plate 1/4 “ from the edge
of the door (Figures 3 & 4). Mark the hole
placement for the latch on the top door edge
and the front of the door. Drill pilot holes for
screws.
8. Fasten the latch on the top and on the front
of the door using 4 at head Phillips screws
(provided).
DOOR STOP INSTALLATION