Installation Guide

RUSTICA LOCK Assembly Instructions
RUSTICAHARDWARE.com
4
3
03
2017
VERSION
e door lock and handle mechanism is shipped assembled. In order to install it on the door,
you will need to disassemble the lock.
2. Remove the two 10-32 screws (3) from the cosmetic plate (4) on
the back of the door lock.
1. Remove the four 4-40 screws (1) from the front cover (2) of
the door lock (Figure 1).
FIRST THINGS FIRST
If you already own a Rustica door, you will need to remove it from its track. It is recommended that
you uninstall it with the help of another person.
4. Remove the handle (7) and handle sha (6) from the top hole
of the lock.
3. Remove the handle hold (5) from the handle sha (6) by
loosening the set screw with an 1/8” Allen wrench.
1
2
3
4
5
6
7
Figure 1