Installation Guide

RUSTICA LOCK Assembly Instructions
30. Insert the handle through the top
hole of the lock on the front of the door.
Slip the handle hold over the handle sha
and secure by tightening the set screw
with an 1/8” Allen wrench (Figure 17).
NOTE:
Leave a small gap between the handle rim and
face plate of the lock mechanism (Figure 17A).
Handle
Hold
Handle &
Handle Sha
Space
Set Screw
Latch Cover
Lock Cover
28. Install the latch cover over the latch,
fastening with four screws (provided)
(Figure 16).
29. Install the lock cover over the lock
mechanism on the front and back of the
door with the screws provided.
Figure 16
Figure 17
Figure 17A
3
03
2017
VERSION
RUSTICAHARDWARE.com
11