Installation Guide

KINGSHIP HANGER Assembly Instructions
RUSTICAHARDWARE.com
5
3
03
2017
VERSION
Door Front
Door Back
Door Front
6. Drill two pilot holes all the way through the
door for each hanger using a drill with an 1/8” drill
bit (Figure 3).
7. Turn the door over. Using a 1-1/8” Forstner bit*,
drill a 7/16” deep hole into each pilot hole
(Figure 4).
*A 1-1/8” Spade bit may be used in pace of a Forstner bit.
8. Turn the door over, returning
it to the face-up position. Drill
all the way through the pilot
holes using a drill with a 3/8”
drill bit (Figure 5).
Figure 3
Figure 4
Figure 5
9. Install the hangers to the front of the door using
lag bolts, washers, and acorn nuts (provided)
(gure 6).
Figure 6