Installation Guide

RUSTICAHARDWARE.com
7
3
03
2017
VERSION
MOUNTAIN MODERN Installation Instructions
2”
1”
1”
Figure 3
Figure 4
Figure 5
4. Lay the header on a at clean surface. Using
a measuring tape, measure 2” from the bottom
of the header. Draw a line the length of the
header with a pencil (Figure 3).
5. Lay the track on top of the header, centering
it with the line drawn on the header. Ensure
the track is 2” from either end of the header.
Using a pencil, mark the hole positions in the
track onto the header (Figure 4). Set the track
aside.
6. Mark the center of the studs onto the header.
Mark 1” from the top edge and 1” above the
bottom edge (Figure 5).