Installation Guide

R H
•••••••••••••••••••••••••••••••••••••••••
INSTALLATION INSTRUCTIONS
PARTS AND TOOLS
www.rusticahardware.com
Assembly Instructions
Wall
Doorway
Door
7. Installing Door Guide
• Hold the Bracket against your
wall with your hand, near the
doorway edge, but not up to it.
Slide your Door towards the
doorway and into the Bracket
to make sure the Bracket will
hold the Door in place, and the
Door will clear the Bracket.
Make a pencil mark in the
middle of the holes in the back
plate of the Bracket.
• Using Short Grabber Screws and a Drill with a
Phillips bit, attach bracket to your wall.
• After you have hung your Door
onto the Track, install the Anti-
jump block on the back side of
the Hanger. Repeat on the other
side.
Adjustable -- nd desired
location and secure with nut
Back of
Hanger
Back of Door
Anti-jump
Block
9. Attaching Door Pull
• We recommend you do not
attach your Door Pull right
against a Slat or Door edge,
so as not to compromise the
integrity of your Door, and
to be visually appealing.
Vertically, the middle of the
Door Pull should be about
3 feet up from your
nished oor.
3’
Wall
Doorway
Door
8. Attaching Anti-jump Blocks
page 5