Installation Guide

B2
B2
C1
B2 B2 B2
B3
A2
A1
L
A3
B1
B2
A4
A1
R
C2
C2 C2
C2
C2
C2
C3
1.
Assembling Your Door - Lay out your door as shown below.
Two Panel Door
Door bottom
with mortise
NOTE: Your door has a mortise (a 1/2” groove that
runs along the bottom of your door) that will house
the door guide. When assembling the door make sure
that all pieces with a mortise (pieces A1 and A2) are
oriented with the mortise facing down toward the
bottom of the door (the side that will be closest to the
oor when the door is hung).
Mortise
7
/16”
Slide all B slats to the right into A1 R. Next, slide A2, bottom Rail, up to A1 R and the B Slats.
Tap slats gently into place with a rubber mallet.