Installation Guide

BUCK HANGER Track & Door Installation Instructions
RUSTICAHARDWARE.com
8
3
03
2017
VERSION
�
Figure 6
Figure 7
Figure 8
11. Hang the door (Figure 6).
12. With the door in the closed position, ensure
the door is hanging straight using a bubble
level.
DOOR GUIDE INSTALLATION
13. Position the Door Guide part way into the
groove in the bottom of the door (Figure 7).
14. Install the Door Guide using a 1” phillips
screw (provided) and a drill with a phillips bit.
SUGGESTION:
Use double stick tape on the bottom of the door
guide to hold the guide in place.
15. Slide the door toward the open position un-
til the other side of the Door Guide is exposed.
16. Install the second 1” phillips screw
(provided) using a drill with a phillips bit
(Figure 8).