Installation Guide

e location where you attach your Door Pull is up
to you. We suggest you don’t attach your Door Pull
too close to the edge of your Door or a seam, as this
would weaken the integrity of your Door. Typically
we recommend that the center of your Door Pull be
lined up 3’ from the bottom of the door.”
Installing the Falcon Door Pull
Installing the Industrial Hangers
Hanger Assembly Track Adjustable Spacers
Lag Screws Hex Bolts Acorn Nuts Anti-jump Brackets
1” Washers Grabber Screws
Door Guide
Instructions
Parts Included
Hard Stops or Lag Soft Stops
Page 9