Manualshelf

Installation Guide

ManualsBrandsRustica Hardware ManualsBarn Doors42 in. x 84 in. Stain, Glaze, Clear Rockwell Rough Sawn Unassembled Wood Barn Door with Sliding Door Hardware Kit
12345678910
Page 7
Half X Door
5.
6.
Attach the Door
Pull and your
Door is ready to
hang.
E1
A5
A6
When the Door is assembled, place A5 Rails (Diagonal
Rails) onto the door so the predrilled holes are facing
up and so they run the same way, from corner to cor-
ner. Attach using the 1-1/4” Grabber Screws
and a drill with a Phillips bit.
7.
4.
Slide Top Rail A4 into place, to cover the tops of the C
Slats. Install top Timberlock.
Slide Side Slat A1 L into place, attaching with all three Tim-
berlocks, tightening by hand. Once again, have someone help
you keep all of the Slats straight. Once you have determined all
are in place, tighten Timberlocks with a ratchet.
A4
A1
L
Z Combination Door