Use and Care Manual
2
STEP 1
(Note: we are using 60” long shelf for
installation demonstration purposes.
Please also note that 36" shelf has
only 3 screw holes)
Mark the screw holes on
the wall by using mini level.
x4
Max 45cm
( 17 ¾” )
For safety reasons, the picture ledge should only be used with pictures
that are max 45 cm high. Pictures that are higher will not stand steady
on the ledge and may fall down.
STEP 2 STEP 3
x4
x4
Broken line
down
Mini level
Screw the anchors into the marked location and
tighten them until anchors are flush with the wall.
Place the ledge on the anchor by matching the screw
holes. Insert the screws into anchors and tighten them.