How to Guide

ManualsBrandsRust-Oleum ManualsMarking PaintV2333838

AEROSOLS TECHNICAL DATA RO-04

V2300 SYSTEM

INVERTED MARKING PAINT

Form: GDH-1092

Rev.: 032416

.DESCRIPTION AND USES .

High Performance Inverted Marking Paint has a high output

spray tip for bold, easy to see markings. It is ideal for utility

locating, surveying, construction sites, excavation sites,

landscaping and athletic fields. Use with the Rust-Oleum

marking wand #2393000 for quick and accurate site marking.

They feature a fast dry and adhesion to pavement, gravel, grass

and more.

.PRODUCTS .

SKU Description

V2301838 Clear

V2324838 Caution Blue (APWA-Potable water)

V2333838 Fluorescent Green

V2344838 High Visibility Yellow (AWPA gas, oil,

steam, petroleum, gaseous materials)

V2345838 Caution Yellow

V2354838 Alert Orange (AWPA communication,

alarm or signal lines, cables conduit)

V2355838 Fluorescent Orange

V2358838 Fluorescent Red Orange

V2363838 Safety Red (AWPA electric power lines,

cables, conduit, lighting cables)

V2392838 White (AWPA proposed excavation)

PACKAGING .

20 fl. oz. container, 15 oz. fill wt., 6 aerosols packed to a carton

.PRODUCT APPLICATION .

SURFACE PREPARATION

ALL SURFACES: Remove loose debris and contaminants

by sweeping the surface before application of the coating.

APPLICATION

Apply when temperature is above 32°F (0°C) and humidity

is below 85% to ensure proper drying. Protect surrounding

surfaces from overspray. Overspray can carry a significant

distance. Shake can vigorously for one minute after mixing

ball is heard. If mixing ball fails to rattle DO NOT STRIKE

CAN. Contact Rust-Oleum. Invert can and point at ground

or floor. Hold the can 4-6 inches above surface to be

marked. Press in sideways to spray or use Rust-Oleum

Marking Wand item #2393000 or Marking Pistol item

#210188. Follow directions for proper use of this

equipment. Keep can moving to prevent build-up. Clean

valve by spraying upright for 2-3 seconds after each use.

CLOGGING

If clogging occurs, carefully remove spray tip and clean in

thinner. DO NOT insert any object into can valve opening.

Use care when replacing the spray tip. Properly discard

empty container. Do not burn or place in trash compactor.

Empty container can be recycled.

Summary of content (2 pages)

PAGE 1
AEROSOLS TECHNICAL DATA RO-04 V2300 SYSTEM INVERTED MARKING PAINT .DESCRIPTION AND USES . .PRODUCT APPLICATION SURFACE PREPARATION High Performance Inverted Marking Paint has a high output spray tip for bold, easy to see markings. It is ideal for utility locating, surveying, construction sites, excavation sites, landscaping and athletic fields. Use with the Rust-Oleum marking wand #2393000 for quick and accurate site marking. They feature a fast dry and adhesion to pavement, gravel, grass and more. .
PAGE 2
TECHNICAL DATA V2300 SYSTEM INVERTED MARKING PAINT PHYSICAL PROPERTIES . INVERTED MARKING PAINT Vinyl Toluene Modified Alkyd Resin Type Varies Pigment Type Acetone, Toluene, Xylene Solvents By Weight 17-23% By Volume — Solids Maximum Value of 1.2 MIR 15 oz.