How to Guide

TECHNICAL DATA
V2100 SYSTEM ENAMEL AEROSOL
Rust-Oleum Corporation Form: GDH-682
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 021115
Vernon Hills, Illinois 60061 www.rustoleum.com/industrial
An RPM Company
. PHYSICAL PROPERTIES .
ENAMELS
PRIMERS
GALVANIZING
HIGH HEAT
Resin Type
V2102838, V2115838, and
V2119838: Acrylic;
All others: Modified alkyd
Modified Alkyd
and Acrylic
Epoxy Ester
V2116838: silicone blend
V2176838: silicone
modified alkyd
Pigment Type
Varies
Zinc phosphate, zinc
molybdate, talc, calcium
carbonate, red iron oxide
(V2169838), titanium
dioxide, carbon black
(V2182838)
V2117838 contains 80%
zinc and 12% aluminum (in
the dry film) V2185838
contains 93% zinc (in the
dry film)
V2116838: aluminum flake
V2176838: black
manganese ferrite
Solvents
Acetone, xylene, toluene (fluorescents also contain hexane), and liquefied petroleum gas propellant
MIR
Finishes: Max value of 1.4
Metallics: Max value of 1.9
Maximum value of 1.2
Maximum value of 1.2
Max value of 1.85
Fill Weight
V2102, V2115, V2119 and all
fluorescents: 14 oz. (398 g.);
All others: 15 oz. (426 g)
Mini Spray 3 oz.
15 oz. (426 grams)
Mini Spray 3 oz.
20 oz. (568 grams)
15 oz. (426 grams)
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-2.0 mils
(25-50µ)
1.0-2.0 mils
(25-50µ)
1.0-2.0 mils
(25-50µ)
1.0-2.0 mils
(25-50µ)
Practical Coverage at
Recommended DFT
(Square Feet / Aerosol)
(Depends on color)
V2100 finishes: Approx.
12-20 sq.ft. (1.1-1.9 m
2
)
Fluorescent finishes: Approx.
10 sq.ft. (0.9 m
2
)
Mini Spray: Approximately
3 sq.ft. (0.7 m
2
)
Approximately
12-20 sq.ft. (1.1-1.9 m
2
)
Mini Spray: Approx.
3 sq.ft. (0.7 m
2
)
Approximately
12-20 sq.ft. (1.1.1.9 m
2
)
Approximately
12-20 sq.ft. (1.1-1.9 m
2
)
Dry Times at
70-80°F (21-27°C)
and 50%
Relative Humidity
Tack-free
10-20 minutes
10-20 minutes
10-20 minutes
V2116838: 10-20 minutes
V2176838: 2-4 hours
Handle
1-2 hours
1-2 hours
1-2 hours
V2116838: 1-2 hours
V2176838: 4-7 hours
Recoat
Within 1 hour or after 24
hours*
At any time
Within 1 hour or after 24
hours**
V2116838: Anytime
V2176838: Within 1 hour or
after 24 hours
Dry Heat Resistance
200°F (93°C)
200°F (93°C)
200°F (93°C)
1000°F (538°C)
Shelf Life
5 years
5 years
5 years
5 years
Safety Information
For additional information, see MSDS
Calculated values are shown and may vary slightly from the actual manufactured material.
*Allow more time in cooler temperatures
**Do not topcoat galvanizing compounds with an alkyd finish.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.