Technical Specifications

Material Safety Data Sheet
RockSolid Crack and Patch
RockSolid Floors • 9/2013
V. 1.0
2271 2
nd
St N, North St. Paul, MN 55109 | P 866.765.4310 | F 866.765.4310
1
RockSolid Floors
2271 2
nd
St N
North St. Paul, MN 55109
Emergency Telephone Number:
866-765-4310
Information Telephone Number:
866-765-4310
Revision Date:
09/2013
SECTION I: PRODUCT IDENTIFICATION
Product Types: DRY PACKAGED FAST SETTING CEMENT BASED PRODUCT
RockSolid Product Name:
Crack and Patch
SECTION II: HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous Components
Silica Sand, crystalline % SiO
2
+2
CAS No.
14808-60-7
PEL (OSHA) mg/M
3
10
TLV (ACGIH) mg/M
3
0.05 (respirable)
Portland Cement
65997-15-1
5
5
Lime
01305-62-0
5
5
May contain one or more of the following:
Amorphous Silica (from Fly Ash ) % SiO
2
07631-86-9
80
10
Alumina (From Fly Ash)
01344-28-1
5
5
Limestone Dust
01317-65-3
5
5
Calcium Sulfate
10101-41-4 or
5
5
13397-24-5
Calcium Sulfo Aluminate
65997-16-2
15
10
Other Limits: NIOSH has recommended that the permissible exposure limit be changed to 50 micrograms respirable free
silica per cubic meter of air (50 ug/M
3
) averaged over a work shift of up to 10 hours per day, 40 hours per week. The
NIOSH Criteria Document for Crystalline Silica should be consulted for more detailed information.
SECTION III: PHYSICAL/CHEMICAL CHARACTERISTICS
Appearance: Gray to gray-brown colored powder. Some products contain coarse aggregate.
Specific Gravity:
2.6 to 3.15
Melting Point: >2700
o
F
Boiling Point:
>2700
o
F
Vapor Pressure:
None
Vapor Density: None
Evaporation Rate:
None
Solubility in Water:
Slight
Odor: None
Solubility in Water:
Slight
SECTION IV: FIRE AND EXPLOSION HAZARD DATA
Non combustible and not explosive.