How to Guide

TECHNICAL DATA
AS2100 SYSTEM ANTI-SLIP AEROSOL
Rust-Oleum Corporation Form: GDH-1096
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 110916
Vernon Hills, Illinois 60061 www.rustoleum.com/industrial
An RPM Company
PHYSICAL PROPERTIES .
ANTI-SLIP AEROSOL
Resin Type
Chain Stop Alkyd
Pigment Type
Varies with color
Solvents
Acetone, Xylene, Toluene
MIR
Maximum value of 2.45
Fill Weight
15 oz.
Solids by weight
18-25% (varies by color)
Recommended Dry Film Thickness
(DFT) Per Coat
1-2 mils
(25-50µ)
Coefficient of
Friction
Dry
0.72
Wet
0.85
Practical Coverage at Recommended
DFT (assumes 15% material loss)
Approximately 14 ft.
2
/can
(1.3 m
2
)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Tack-free
NA
Walk-on
24-48 hours
Recoat
1-2 hours
Dry Heat Resistance
175°F (79°C)
Shelf Life
5 years
Safety Information
For additional information, see SDS
Calculated values are shown and may vary slightly from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.