Technical Specifications

URETHANE
TECHNICAL DATA
RO-71
HIGH PERFORMANCE
9800 SYSTEM DTM URETHANE MASTIC
1
Form: GDH-490
Rev.: 020420
DESCRIPTION AND USES
The 9800 System DTM Urethane Mastic is a two component, high
solids, high build, direct to metal, aliphatic acrylic polyurethane. This
urethane mastic coating is designed to provide corrosion protection of
steel in moderate to severe environments. It can be used directly on
sound rusted steel with minimum surface preparation. It can also be
used on clean steel, galvanized metal, concrete and previously
coated surfaces with proper surface preparation.
It is suitable for tanks, towers, equipment, metal buildings, or
chemical environments.
This product has been approved per MPI specification #72. Visit
paintinfo.com for details
1
.
PRODUCTS
FINISHES – GLOSS
1 Gallon
5 Gallons
DESCRIPTION
9815419
-----
Alumi-NON
®
9865419
-----
Regal Red
9871419
9871383
Dunes Tan
9879419
-----
Black
9882419
252716
Silver Gray
9886419
-----
Navy Gray
9892419
9892383
White
9825419
-----
Safety Blue
9844419
-----
Safety Yellow
204004
297083
Safety Red
-----
M988404383
2
ANSI 61 Light Gray
-----
252726
ANSI 70 Light Gray
FINISHES – SATIN
1 Gallon
DESCRIPTION
332051
Satin Black
332052
Satin White
332053
Satin Safety Blue
332054
Satin Safety Red
332056
Satin Safety Yellow
332055
Satin Dunes Tan
336366
Satin Silver Gray
FINISHES – FLAT
1 Gallon
5 Gallons
DESCRIPTION
321696
322009
Flat Black
1
Refer to the MPI website for the most current listing of MPI certified products.
2
Made-to-order only. Contact Rust-Oleum Customer Service for details.
PRODUCTS (cont.)
TINT BASES – GLOSS
1 Gallon
5 Gallons
DESCRIPTION
9805470
-----
Red Base
9806470
-----
Yellow Base
9807470
9807370
Masstone Base
9808405
9808375
Deep Base
9809415
9809377
Light Base
TINT BASES – SATIN
1 Gallon
DESCRIPTION
332057
Satin Masstone Base
332058
Satin Deep Base
332059
Satin Light Base
ACTIVATOR
1 Quart
1 Gallon
DESCRIPTION
9801501
9801419
Activator
All 9800 System standard colors (except 9815 Alumi-Non), tint bases
and activators comply with USDA FSIS regulatory sanitation
performance standards for food establishment. This coating is
impervious to moisture and easily cleaned and sanitized. Agriculture
Canada accepted: 9815, 9822, 9825, 9879, 9892, 9833, 9844, 9845,
9882, 9865, 9868, 9871 and 9886.
ENHANCED WEATHERING OPTION
9800 UV* is available as a made-to-order product which has been
formulated to optimize color and gloss retention when needed in order
to maximize appearance in exterior applications. Contact your
Rust-Oleum Sales Representative for ordering details.
PACKAGING
ONE GALLON
Standard premix colors are packaged in a short filled gallon container
to allow for the addition of activator. The 9801501 Activator is
packaged in a short filled, cone top, quart container. The combined
base and activator components will yield one full gallon.
FIVE GALLON
Standard premix colors are packaged in a short filled five gallon pail to
allow for the addition of activator. The 9801419 Activator is packaged
in a short filled gallon container. The combined base and activator
components will yield five full gallons.
TINT BASES
The base component for the tint bases are further short filled to allow
for the addition of both the activator and the colorant. The amount of
colorant used will vary for the specific color.
The following tint bases are available:
Red Base – The red tint base can accept up to 16 ounces of colorant
per gallon. Not available in fives or in Satin.
*Contains extra UV inhibitors.